HP A6684A and A6685A HSC Fibre Channel Adapter Release Notes, December 2001

HP A6684A and A6685A HSC Fibre Channel Adapter Release Notes
Compatibility Information and Installation Requirements
15
commands are preceded by “#”.
Installing on 10.20
1. Login as root.
2. Check whether the GSCtoPCI entry is present in the /stand/system file:
# grep GSCtoPCI /stand/system
If it is not there, edit the /stand/system file and add it under the Drivers/Subsystems
section.
3. Verify that the bundle, J3630BA, is installed on the system by looking at the swlist output:
# swlist | grep J3630BA
4. Verify that you have the /usr/conf/lib/libfcms.a library on your system:
# ls /usr/conf/lib/libfcms.a
If either J3630BA is not installed, or /usr/conf/lib/libfcms.a is not present, install the
J3630BA bundle from any of the Application Release CDs dated March 2000 or later.
After the installation, the swlist output should contain J3630BA and the
/usr/conf/lib/libfcms.a library should be present.
5. Verify whether the patches PHKL_16751, PHKL_17590 and PHSS_23581 are installed on
your system:
# what /usr/conf/lib/libpci.a | grep dino3 | grep PHKL
The output should contain PHKL_16449 or any of the later patches. Please note that
PHKL_16751 is the same as PHKL_16449 in this specific case of dino3.
# what /usr/conf/lib/libhp-ux.a | grep diag1 | grep PHKL
The output should contain PHKL_17590 or any of the later patches.
# what /usr/config/lib/libfcms.a | grep fcms | grep PHSS
The output should contain PHSS_23581 or any of the later patches.
If any of the above libraries or patches are not found on the system, download and install
them from http://us-support2.external.hp.com.
Verify the success of the patch installation by repeating the above steps.
6. Download the 10.20 Tachlite driver depot to /tmp directory from
http://www.software.hp.com.
7. Verify that the file has downloaded correctly using swlist.