HP A6684A and A6685A HSC Fibre Channel Adapter Release Notes, December 2001

HP A6684A and A6685A HSC Fibre Channel Adapter Release Notes
Compatibility Information and Installation Requirements
16
# swlist -d @ /tmp/<10.20 depot> | grep A6685A (or A6684A)
8. Install the HSC Tachlite product.
# swinstall -s /tmp/<10.20 depot>
9. 9. Verify the HSC Tachlite driver installation after the system reboots.
# what /stand/vmunix | grep td
If the output does not contain the string libtd.a, the installation has not been successful.
One common reason for the failure could be a lack of disk space. If this is the reason, create
sufficient disk space and retry the installation. If the installation fails again, contact the
HP Response Center.
Installation Procedures for 11.00
1. . Login as root.
2. 2. Check whether the GSCtoPCI entry is present in the /stand/system file:
# grep GSCtoPCI /stand/system
If it is not there, edit the /stand/system file and add it under the Drivers/Subsystems
section.
3. Verify that you have HP-UX 11.00 ACE dated November 1999 or later installed on your
system by looking at the swlist output:
# swlist | grep ACE
You should get output similar to the following:
XSWGR1100 B.11.00.47.08 General Release Patches November 1999 (ACE)
If you do not have the specified version of HP-UX, install it from the HP-UX 11.00
Additional Core Enhancements (ACE) CD dated November 1999 or later.
After the installation, verify again with swlist as described above.
4. Verify whether the patch PHKL_23939 exists on your system.
# what /usr/conf/lib/libfcms.a | grep fcms | grep PHKL
The output should contain PHKL_23939 or any of the later patches.
If the patch is not found on the system, download and install it from
http://us-support2.external.hp.com
Verify the success of the patch installation by repeating the above step.
5. Download the 11.00 Tachlite driver depot to /tmp directory from