HP Fibre Channel Mass Storage Adapters Support Guide FibrChanl-01 (fcd) Driver

If the system firmware meets or exceeds the minimum required version, go to E. If not, go to

E. Enter the swlist command to see if the Fibre Channel Mass Storage filesets have been installed.

For example, enter swlist -l fileset.

F. Does FC FILESET display? The file sets displayed depend on the Fibre Channel adapter product

you are using. An example of file set for the PCI Tachyon TL and XL2 adapters is:

FC-TACHYON-TL-FC-TL-KRN and FC-TACHYON-TL-RUN

An example file set for the A6826A dual port adapter is:

FC-FCD-KERN and FC-FCD-RUN

An example file set for other Fibre Channel adapters is:

FCMassStorage.FCMS-KRN and FCMassStorage.FCMS-RUN

If the proper FILESET displays, and you still do not see the adapter, the adapter may have a

problem. Go to Flowchart 2. If the file sets do not display, proceed to I.

G. Update the system firmware. Then go back to number 1 on Flowchart 1.

H. Device Displayed? If devices do not display, go to number 4 on Flowchart 2.

26 Troubleshooting and Maintenance