HP Fibre Channel Mass Storage Adapters Support Guide FibrChanl-01 (fcd) Driver

• A9784A PCI-X Combo 1-port 2Gb Fibre Channel and 1-port 1000Base-SX (fiber) Adapter
• AB465A PCI-X Combo 2-port 2Gb Fibre Channel and 2-port 1000Base-T (copper) Adapter
Table 1 (page 7) lists the bundle and product name for each adapter.
Table 1 Fibre Channel Adapter Bundle and Product Names
DriverSoftware NameSoftware BundleOS VersionAdapter
fcdFC-FCDFibrChanl-0111i v3 only451871-B21
fcdFC-FCDFibrChanl-0111i v3 onlyAH400A
fcdFC-FCDFibrChanl-0111i v3 onlyAH401A
fcdFC-FCDFibrChanl-0111i v3 and 11i
v2
403619-B21
fcdFC-FCDFibrChanl-0111i v1, 11i v2,
and 11i v3
AB378B
fcdFC-FCDFibrChanl-0111i v1, 11i v2,
and 11i v3
AB379B
fcdFC-FCDFibrChanl-0111i v1, 11i v2,
and 11i v3
AD193A
fcdFC-FCDFibrChanl-0111i v1, 11i v2,
and 11i v3
AD194A
fcdFC-FCDFibrChanl-0111i v2 and 11i
v3
AD300A
fcdFC-FCDFibrChanl-0111i v1, 11i v2,
and 11i v3
AB378A
fcdFC-FCDFibrChanl-0111i v1, 11i v2,
and 11i v3
AB379A
fcdFC-FCDFibrChanl-0111i v1, 11i v2,
and 11i v3
A6826A
fcdFC-FCDFibrChanl-0111i v1, 11i v2,
and 11i v3
A9782A
fcdFC-FCDFibrChanl-0111i v1, 11i v2,
and 11i v3
A9784A
fcdFC-FCDFibrChanl-0111i v1, 11i v2,
and 11i v3
AB465A
To install the software bundle, follow these steps:
1. Log in to the system as root.
2. Insert the CD into the CD drive.
3. Mount the CD using the following command:
mount /dev/dsk/<cd_rom_dev_file> /<tmp_mnt>
4. Run swinstall to install the software. Enter the following command:
/usr/sbin/swinstall
The Software Selection window and the Specify Source window open.
5. In the Specify Source window, change the Source Host Name if necessary. Enter the mount
point of the drive in the Source Depot Path field and click OK to return to the Software Selection
window.
Click Help to get more information.
6. Select the appropriate software bundle for your adapter.
Installing Driver Software 7