HP Fibre Channel Mass Storage Adapters Support Guide FibrChanl-02 (fclp) Driver HP-UX 11i v2 and 11i v3

Supported Products
The Fibre Channel Adapter Monitor supports the following product:
• AH403A
• AH402A
• 456972-B21
• AD221A
• AD222A
• AD393A
• 403621-B21
• AD299A
• AD355A
• AT094A
Installing and Configuring Support Tools Manager and EMS
System requirements:
• HP-UX computer (servers or workstations)
• HP-UX 11i v2, 11i v3, or later HP-UX operating system versions
• Support Plus Media CD
• If you are using ServiceGuard (optional), check for the correct version you must have for HP-UX
11i v2, or later HP-UX operating system versions
Procedure
1. Install the Support Tools Manager (STM) from the latest Support Plus Media CD. The EMS
hardware monitors automatically install when you install STM.
a. Enter the following command to see if STM is installed on your system: /usr/sbin/cstm
The message --Information-- Support Tools Manager should appear on your
screen, indicating that STM is installed on your system.
b. If this does not appear, STM needs to be installed. For instructions on how to install STM
see Chapter 5, “Using the Support Plus Media to Install Diagnostics”, in the manual
Support Plus: Diagnostics User's Guide, available at: http://docs.hp.com/diag/index.html
2. Examine the list of supported products to see if any of your devices have special requirements
to be monitored.
3. Add or modify monitoring requests to customize the monitoring configuration for your system.
4. (Recommended) Verify that monitors are correctly operating; for example, simulate a hardware
failure or event and view the logs.
The default hardware monitoring configuration meets most monitoring requirements. By default,
messages regarding warning, serious, and critical events are written to
/var/adm/syslog/syslog.log and sent to the root e-mail address. All events are also stored
in/var/opt/resmon/log/event.log.
If you must customize the default monitoring configuration, you can add or modify monitoring
requests as needed.
Offline Diagnostics Environment (ODE)
All HP Fibre Channel adapters support the HP Offline Diagnostics Environment (ODE). ODE is an
offline support tools platform for troubleshooting HP/9000 and HP Integrity systems running without
Offline Diagnostics Environment (ODE) 17