HP Fibre Channel Mass Storage Adapters Support Guide FibrChanl-02 (fclp) Driver HP-UX 11i v2 and 11i v3

Table 1 Fibre Channel Adapter Bundle and Product Names
DriverSoftware NameSoftware BundleOS VersionAdapter
fclpFC-FCLPFibrChanl-0211i v3 onlyAH403A
fclpFC-FCLPFibrChanl-0211i v3 onlyAH402A
fclpFC-FCLPFibrChanl-0211i v3 only456972-B21
fclpFC-FCLPFibrChanl-0211i v3 only403621-B21
fclpFC-FCLPFibrChanl-0211i v3 onlyAD221A
fclpFC-FCLPFibrChanl-0211i v3 onlyAD222A
fclpFC-FCLPFibrChanl-0211i v3 onlyAD393A
fclpFC-FCLPFibrChanl-0211i v2 and 11i v3AD299A
fclpFC-FCLPFibrChanl-0211i v2 and 11i v3AD355A
fclpFC_FCLPFibrChanl-0211i v3AT094A
To install the software bundle, follow these steps:
1. Log in to the system as root.
2. Insert the CD or DVD into the drive.
3. Mount the CD using the following command:
mount /dev/dsk/<cd_rom_dev_file> /<tmp_mnt>
4. Run swinstall to install the software. Enter the following command:
/usr/sbin/swinstall
The Software Selection window and the Specify Source window open.
5. In the Specify Source window, change the Source Host Name if necessary. Enter the mount
point of the drive in the Source Depot Path field and click OK to return to the Software Selection
window.
Click Help to get more information.
6. Select the appropriate software bundle for your adapter.
7. Select Mark for Install from the Actions menu.
8. Select Install from the Actions menu. Installation begins and the Install Analysis window opens.
9. Click OK in the Install Analysis window to confirm that you want to install the software. The
Install window opens.
View the Install window to read processing data while the software installs. When the Status
field indicates Ready, the Confirmation window opens.
10. Click OK. A second Confirmation window opens.
11. Click OK again. The Install window opens.
12. Click Done. The Note window opens.
13. Click OK in the Note window to reboot. The user interface disappears and the system reboots.
14. Once the system comes back up, log in as root and open the following files to see any error
or warning messages that may have occurred during the installation:
/var/adm/sw/swagent.log
/var/adm/sw/swinstall.log
15. Install OnlineDiag, which is available at https://h20392.www2.hp.com/portal/swdepot/
index.do. OnlineDiag is also available from the HP Support PLUS CD. Installation instructions
are available at: http://docs.hp.com/hpux/onlinedocs/diag/st/st_inst.htm
Installing Driver Software 7