HP Fibre Channel Mass Storage Adapters Support Guide FibrChanl-03 (fcoc) Driver HP-UX 11i v3

E. Enter the swlist command to see if the Fibre Channel Mass Storage filesets have been installed.
For example, enter swlist -l fileset.
F. Does FC FILESET display? The file sets displayed depend on the Fibre Channel adapter product
you are using.
An example file set for the NC551m adapter is:
FC-FCOC-KERN and FC-FCOC-RUN
If the proper FILESET displays, and you still do not see the adapter, the adapter may have a
problem. Go to Flowchart 2: Fibre Channel Connections Test. If the file sets do not display,
proceed to I.
G. Update the system firmware. Then go back to number 1 on Flowchart 1: Configuration Test.
H. Device Displayed? If devices do not display, go to number 4 on Flowchart 2: Fibre Channel
Connections Test.
Fibre Channel Connections Test
Figure 2 Flowchart 2: Fibre Channel Connections Test
14 Troubleshooting and Maintenance