HP PCI Tachyon TL/TS/XL2 Fibre Channel Release Notes, May 2008

Table 1-1 Fibre Channel Driver Version History (continued)
HP-UX 11i v3.0HP-UX 11i v2.0HP-UX 11i v1.6HP-UX 11i v1HP-UX 11.00Release
B.11.23.0706
(64-bit)
B.11.11.14
(32-bit or 64-bit)
Application
Release 0706
B.11.31.0709
(64-bit)
B.11.23.0709
(64-bit)
B.11.11.15
(32-bit or 64-bit)
Application
Release 0709
B.11.31.0712
(64-bit)
B.11.23.0712
(64-bit)
Application
Release 0712
B.11.31.0803
(64-bit)
B.11.23.0803
(64-bit)
B.11.11.16
(32-bit or 64-bit)
Application
Release 0803
B.11.11.17
(32-bit or 64-bit)
Application
Release 0809
What is New in This Version
This version of the HP PCI Tachyon TL/TS/XL2 Fibre Channel driver contains only
defect fixes and does not offer any new feature. For information about the defect fixes,
see “Defects Fixed in This Release” (page 8).
Installation Requirements
You must install the following software and patch before installing the HP PCI Tachyon
TL/TS/XL2 Fibre Channel driver on the system:
• Fibre Channel Mass Storage (FCMS) Patch PHKL_23626 or later
This patch is available for download at the following websites:
http://h20293.www2.hp.com/
http://itresourcecenter.hp.com
Verifying the HP PCI Tachyon TL/TS/XL2 Fibre Channel Driver Installation
To verify whether the HP PCI Tachyon TL/TS/XL2 Fibre Channel driver is installed
successfully on your system, enter the following command at the HP-UX prompt:
# swlist FibrChanl-00
Where:
FibrChanl-00 is the bundle name for the HP PCI Tachyon TL/TS/XL2 Fibre
Channel driver.
If the HP PCI Tachyon TL/TS/XL2 Fibre Channel driver is installed successfully on the
system, the following message is displayed:
# Initializing...
# Contacting target "hostname"...
#
# Target: hostname:/
#
What is New in This Version 7