HP PCIe 16GB 1 port and 2 port Fibre Channel QLogic HBAs using HP-UX Installation Guide

Example 2 Example of fcmsutil /dev/fcd0 vpd command to show Vital Product Data (VPD)
after installation
# fcmsutil /dev/fcd0 vpd
V I T A L P R O D U C T D A T A
--------- ------------- -------
Product Description : HP SN1000Q 16Gb 2P FC HBA
Part number : QW972-63001
Engineering Date Code : A-5235
Part Serial number : 3U724550FZ
Misc. Information : PW=18 Watts
Mfd. Date : 5245
Mfd. ID : HD8310405-18 C
Check Sum : 0xff
Multiboot Version : 020247
EFI Version : 06.13
ROM Firmware version : 6.7.2
Asset Tag : NA
Example 3 Example of ioscan report after installation
# ioscan -kfnNC lunpath -H 0/0/0/3/0/0/0
Class I H/W Path Driver S/W State H/W Type Description
==================================================================
lunpath 99 0/0/0/3/0/0/0.0x21630002ac001aff.0x0 eslpt CLAIMED LUN_PATH LUN path for
ctl76
lunpath 103 0/0/0/3/0/0/0.0x21630002ac001aff.0x4001000000000000 eslpt CLAIMED LUN_PATH LUN path for
disk214
lunpath 104 0/0/0/3/0/0/0.0x21630002ac001aff.0x4002000000000000 eslpt CLAIMED LUN_PATH LUN path for
disk215
lunpath 105 0/0/0/3/0/0/0.0x21630002ac001aff.0x4003000000000000 eslpt CLAIMED LUN_PATH LUN path for
disk216
lunpath 106 0/0/0/3/0/0/0.0x21630002ac001aff.0x4004000000000000 eslpt CLAIMED LUN_PATH LUN path for
disk217
lunpath 135 0/0/0/3/0/0/0.0x21630002ac001aff.0x4005000000000000 eslpt CLAIMED LUN_PATH LUN path for
disk219
lunpath 136 0/0/0/3/0/0/0.0x21630002ac001aff.0x4006000000000000 eslpt CLAIMED LUN_PATH LUN path for
disk221
lunpath 137 0/0/0/3/0/0/0.0x21630002ac001aff.0x4007000000000000 eslpt CLAIMED LUN_PATH LUN path for
disk223
lunpath 138 0/0/0/3/0/0/0.0x21630002ac001aff.0x4008000000000000 eslpt CLAIMED LUN_PATH LUN path for
disk222
lunpath 140 0/0/0/3/0/0/0.0x21630002ac001aff.0x4009000000000000 eslpt CLAIMED LUN_PATH LUN path for
disk218
lunpath 141 0/0/0/3/0/0/0.0x21630002ac001aff.0x400a000000000000 eslpt CLAIMED LUN_PATH LUN path for
disk220
lunpath 142 0/0/0/3/0/0/0.0x21630002ac001aff.0x400b000000000000 eslpt CLAIMED LUN_PATH LUN path for
disk224
lunpath 143 0/0/0/3/0/0/0.0x21630002ac001aff.0x400c000000000000 eslpt CLAIMED LUN_PATH LUN path for
disk235
#
Verifying connectivity
Once the HP Fibre Channel Mass Storage software and hardware are installed and running, use
these steps to verify connectivity:
1. Check the state of all Fibre Channel hardware and interfaces. Enter the ioscan command
and verify the Hardware State and the hw Interface state are CLAIMED.
If the Fibre Channel device file has not been created, enter these commands:
Verifying connectivity 17