HP PCIe 16GB 1 port and 2 port Fibre Channel QLogic HBAs using HP-UX Installation Guide

Figure 1 Dual Port HBA
LEDs referenced in this document are on the front plane of the card.
Using the Event Viewer
The miniport drivers verify the condition of the HBA's POST LED states. If there is a failure or a
suspected failure, an error log entry appears in the Windows Event Log. Use the Event viewer to
access the Event log.
To open the Event Viewer:
1. Click Start > Programs > Administrative Tools > Event Viewer, or right-click My Computer and
select Manage.
2. Click Event Viewer in Computer Management. The Event Viewer window appears.
3. See https://support.qlogic.com/app/home for information about interpreting the event codes.
20 Troubleshooting