HP-UX and Windows OS Installation Guide for HP PCIe 8Gb and 4Gb 2 Port Fibre Channel Emulex Mezzanine HBA

Example 3-1 Example of the “fcmsutil /dev/fclp2” command
# fclputil /dev/fclp2
Vendor ID is = 0x10df
Device ID is = 0xf100
PCI Sub-system Vendor ID is = 0x103c
PCI Sub-system ID is = 0x1719
Chip version = 3
Firmware Version = 1.10A5 SLI-3 (U3F1.10A5)
EFI Version = UU6.03A7
EFI Boot = ENABLED
Driver-Firmware Dump Available = NO
Driver-Firmware Dump Timestamp = N/A
Topology = PTTOPT_FABRIC
Link Speed = 4Gb
Local N_Port_id is = 0x010400
Previous N_Port_id is = None
N_Port Node World Wide Name = 0x20000000c983c65c
N_Port Port World Wide Name = 0x10000000c983c65c
Switch Port World Wide Name = 0x200400051e074d76
Switch Node World Wide Name = 0x100000051e074d76
Driver state = ONLINE
Hardware Path is = 0/4/0/0/0/0
Maximum Frame Size = 2048
Driver Version = @(#) FCLP: PCIe Fibre Channel driver (FibrChanl-02), B.11.31.0903,
Mar 16 2008, FCLP_IFC (3,2)
This card is capable of running at bus speeds up to PCIe x8 link width. The actual link width is
displayed as the PCI Mode.
18 Installing the HP-UX Operating System Components