PCIe 4/8 GB 2 Port Fibre Channel QLogix Mezz HBA Install Guide, Edition 2, September 2010

http://www.hp.com/go/hpux-iocards-docs for details.
Use the following procedure to load the driver from a DVD-ROM:
1. Log in to the system as root.
2. Insert the DVD into the DVD drive.
3. Mount the DVD using the following command:
mount /dev/dsk/<dvd_rom_dev_file> /<tmp_mnt>
4. Run swinstall to install the software. Enter the following command:
/usr/sbin/swinstall
The Software Selection window and the Specify Source window open.
5. In the Specify Source window, change the Source Host Name if necessary. Enter the
mount point of the drive in the Source Depot Path field and click OK to return to the
Software Selection Window.
Click Help to get more information.
6. Select the appropriate software bundle for your adapter.
7. Select Mark for Install from the Actions menu.
8. Select Install from the Actions menu. Installation begins and the Install Analysis window
opens.
9. Click OK in the Install Analysis window to confirm that you want to install the software.
The Install window opens.
View the Install window to read processing data while the software installs. When the
Status field indicates Ready, the Confirmation window opens.
10. Click OK. A second Confirmation window opens.
11. Click OK again. The Install window opens.
12. Click Done. The Note window opens.
13. Click OK in the Note window to reboot. The user interface disappears and the system reboots.
14. Once the system returns to a login, log in as root and open the following files to see any
error or warning messages that may have occurred during the installation:
/var/adm/sw/swagent.log
/var/adm/sw/swinstall.log
15. Install OnlineDiag, which is available at:
http://h20392.www2.hp.com/portal/swdepot/index.do
OnlineDiag is also available from the HP Support PLUS CD. Installation instructions are
available at:
http://docs.hp.com/en/diag/st/st_inst.htm
Installing Online Diag
Failure to properly complete the steps in this procedure may result in erratic system behavior
or system failure and may void the warranty. For assistance with this procedure, contact your
local HP Authorized Service Provider.
Install OnlineDiag, which is available at the following website:
http://h20392.www2.hp.com/portal/swdepot/index.do. OnlineDiag is also available from the HP
Support Plus CD for PA-RISC systems or the IPF CD for Itanium®-based systems. Installation
instructions are available at:
http://docs.hp.com/en/diag/st/st_inst.htm
16 Installing the HP-UX Operating System Components