PCIe 4/8 GB 2 Port Fibre Channel QLogix Mezz HBA Install Guide, Edition 2, September 2010

4. If the correct driver is installed and the adapter is not listed in the ioscan output, contact
HP for assistance.
Obtaining card information after installation
Review the following reports for the HBA card information after installation.
Example 3-1 Example of the “fcmsutil /dev/fcd3” command
fcmsutil /dev/fcd3
Vendor ID is = 0x1077
Device ID is = 0x2532
PCI Sub-system Vendor ID is = 0x103C
PCI Sub-system ID is = 0x3261
PCI Mode = PCI Express x8
ISP Code version = 4.4.4
ISP Chip version = 2
Topology = PTTOPT_FABRIC
Link Speed = 4Gb
Local N_Port_id is = 0x690700
Previous N_Port_id is = None
N_Port Node World Wide Name = 0x50060b0000c28607
N_Port Port World Wide Name = 0x50060b0000c28606
Switch Port World Wide Name = 0x2004000dec3b4c80
Switch Node World Wide Name = 0x2002000dec3b4c81
N_Port Symbolic Port Name = sislt111_fcd3
N_Port Symbolic Node Name = sislt111_HP-UX_B.11.31
Driver state = ONLINE
Hardware Path is = 0/4/0/0/0/1
Maximum Frame Size = 2048
Driver-Firmware Dump Available = NO
Driver-Firmware Dump Timestamp = N/A
Driver Version = @(#) fcd B.11.31.0903 Mar 16 2009#
This card is capable of running at bus speeds up to PCIe x8 link width. The actual link width is
displayed as the PCI Mode.
18 Installing the HP-UX Operating System Components