HP Comware-Based Switches Transceiver Modules User Guide Part number: 5998-1616 Document version: 6W101-20131015
Legal and notice information © Copyright 2013 Hewlett-Packard Development Company, L.P. No part of this documentation may be reproduced or transmitted in any form or by any means without prior written consent of Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice.
Contents Overview ······································································································································································ 1 Types of transceiver modules ··········································································································································· 1 Fiber transceiver modules ································································································································
Models and specifications ············································································································································ 21 QSFP+ transceiver modules······································································································································· 22 40-Gigabit QSFP+ fiber transceiver module ··············································································································· 22 Appearance ·········
Overview This guide helps you use transceiver modules available on the following HP Comware-Based Switches: HP FlexFabric 12900 Switch Series HP 12500 Switch Series HP FlexFabric 11900 Switch Series HP 10500 Switch Series HP 9500 Switch Series HP 7500 Switch Series HP 6125 Blade Switch Series HP 5920 Switch Series HP 5900 Switch Series HP 5830 Switch Series HP 5820X Switch Series HP 5800 Switch Series HP 5500 HI Switch Series HP 5500 EI Switch Series
Transceiver module type Description Connector type 100 Mbps BIDI fiber transceiver module Gigabit coarse wavelength division multiplexing (CWDM) fiber transceiver module Hot-swappable CWDM fiber transceiver module Gigabit SFP copper transceiver module N/A RJ-45 Gigabit SFP cable Hot-swappable, used for interconnecting 1-Gigabit SFP ports N/A 10-Gigabit SFP+ fiber transceiver module Hot-swappable SFP+ fiber transceiver module LC 10-Gigabit SFP+ cable Hot-swappable, used for interconnecting 10-
The commonly used fiber modules include optical transmitters, optical receivers, transceivers, and transponders. The HP Comware-Based Switches support transceiver modules. The HP Comware-Based Switches support fiber transceiver module models of different specifications. You can choose fiber transceiver modules as needed for data transmission over optical fibers.
Fiber Fiber mode Depending on the mode of light transmission in fibers, fibers fall into single-mode and multimode. Multimode fibers Multimode fibers (MMFs) have thicker fiber cores and can transport light in multiple modes. However, the intermodal dispersion is greater and worsens as the transmission distance increases. Multimode fibers can be classified into multiple grades according to their diameters and modal bandwidth. For more information, see Table 2.
Interface type 10GBASE-LRM Central wavelength 1300 nm Fiber grade Transmission distance FDDI-grade < 220 m (721.78 ft) OM1 < 220 m (721.78 ft) OM2 < 220 m (721.78 ft) OM3 < 220 m (721.78 ft) Single-mode fibers Single-mode fibers (SMFs) have thinner fiber cores and can transmit light in only one mode. Single-mode fibers suffer little intermodal dispersion and are suitable for long-haul communication. Fiber diameter Fiber diameter is expressed as core diameter/cladding diameter, in μm.
Figure 2 MPO connector Connector index WARNING! The average output optical power of a long-haul fiber transceiver module is greater than the saturated optical power. Be careful about the length of the optical fiber you use to make sure the actual received optical power reaching the fiber transceiver module is less than its saturated optical power. Otherwise, the fiber transceiver module might be damaged.
Attenuation refers to the dissipation of the power of a transmitted signal as it travels over a cable. Attenuation occurs because signal transmission suffers certain resistance from the cable, which weakens the signals as they travel over the cable. When signals are transmitted over a very long distance, signal strength decreases significantly, causing the signal-to-noise ratio to drop below the accepted level. This makes it impossible to distinguish between signals and noise, resulting in decision errors.
SFP transceiver modules Gigabit SFP fiber transceiver module Appearance Figure 4 Gigabit/100 Mbps SFP fiber transceiver module Models and specifications Gigabit SFP fiber transceiver modules provide a transmission rate of 1250 Mbps and use LC connectors.
Product code Name Central wavelen gth (nm) Fiber mode Fiber diameter (µm) Modal bandwidth (MHz*km) Transmission distance JD103A HP X120 1G SFP LC LH100 Transceiver 1550 SMF 9/125 N/A 100 km (62.14 miles) Table 6 Specifications of Gigabit SFP fiber transceiver modules (2) Connector index (dBm) Product code Name JD118B Output optical power Receiving sensitivity Saturated optical power HP X120 1G SFP LC SX Transceiver –9.5 to 0 ≤–17 ≤–3 JD119B HP X120 1G SFP LC LX Transceiver –9.
Product code Name Central wavelen gth (nm) Data rate (Mbps) Fiber diameter (µm) Fiber mode LC FX Transceiver Transmission distance 62.5/125 JF832A HP X120 100M/1G SFP LC LX Transceiver 1310 125 SMF 9/125 10 km (6.21 miles) JD120B HP X110 100M SFP LC LX Transceiver 1310 155 SMF 9/125 15 km (9.32 miles) JD090A HP X110 100M SFP LC LH40 Transceiver 1310 155 SMF 9/125 40 km (24.86 miles) JD091A HP X110 100M SFP LC LH80 Transceiver 1550 155 SMF 9/125 80 km (49.
Models and specifications Gigabit BIDI transceiver modules provide a transmission rate of 1250 Mbps and use LC connectors. Table 9 Specifications of Gigabit BIDI transceiver modules (1) Central wavelength (nm) Product code Name JD098B JD099B Transmitting end (TX) Receiving end (RX) HP X120 1G SFP LC BX 10-U Transceiver 1310 1490 HP X120 1G SFP LC BX 10-D Transceiver 1490 Fiber mode Fiber diameter (µm) Transmission distance SMF 9/125 10 km (6.
Table 11 Specifications of 100 Mbps BIDI transceiver modules (1) Central wavelength (nm) Product code Name JD100A JD101A Transmitting end (TX) Receiving end (RX) HP X110 100M SFP LC BX 10-U Transceiver 1310 1550 HP X110 100M SFP LC BX 10-D Transceiver 1550 Fiber mode Fiber diameter (µm) Transmission distance SMF 9/125 15 km (9.
Table 13 Specifications of Gigabit CWDM transceiver modules (1) Product code Name Central wavelength (nm) JD113A HP X170 1G SFP LC LH70 1470 Transceiver 1470 JD114A HP X170 1G SFP LC LH70 1490 Transceiver 1490 JD115A HP X170 1G SFP LC LH70 1510 Transceiver 1510 JD116A HP X170 1G SFP LC LH70 1530 Transceiver 1530 JD109A HP X170 1G SFP LC LH70 1550 Transceiver 1550 JD110A HP X170 1G SFP LC LH70 1570 Transceiver 1570 JD111A HP X170 1G SFP LC LH70 1590 Transceiver 1590 JD112A HP X170 1G
NOTE: Gigabit CWDM transceiver modules adopt the CWDM technology that uses wavelength division multiplexers to multiplex optical signals with different wavelengths for transmission over a single optical fiber, thereby saving optical fiber resources. The receiving end uses a wavelength division demultiplexer to demultiplex the multiplexed optical signals.
Models and specifications Table 16 Specifications of Gigabit SFP cables Product code Name Cable length Data rate Cable type Description JD324A HP A3600 Switch SFP Stacking Kit 1.5 m (4.
SFP+ transceiver modules 10-Gigabit SFP+ fiber transceiver module Appearance Figure 9 10-Gigabit SFP+ fiber transceiver module Models and specifications 10-Gigabit SFP+ fiber transceiver modules provide a transmission rate of 10.31 Gbps and use LC connectors. Table 17 Specifications of 10-Gigabit SFP+ fiber transceiver modules (1) Product code Name Central wavelen gth (nm) Fiber mode Fiber diameter (µm) 50/125 JD092B HP X130 10G SFP+ LC SR Transceiver 850 MMF 62.
Table 18 Specifications of 10-Gigabit SFP+ fiber transceiver modules (2) Connector index (dBm) Product code Name JD092B Output optical power Receiving sensitivity Saturated optical power HP X130 10G SFP+ LC SR Transceiver –7.3 to –1 ≤–7.5 +0.5 JD093B HP X130 10G SFP+ LC LRM Transceiver –6.5 to +0.5 ≤–6.5 +1.5 JD094B HP X130 10G SFP+ LC LR Transceiver –8.2 to +0.5 ≤–10.3 +0.5 JG234A HP X130 10G SFP+ LC ER 40km Transceiver –4.7 to +4 ≤–14.
XFP transceiver modules Appearance Figure 11 XFP transceiver module Models and specifications 10-Gigabit XFP fiber transceiver modules use LC connectors. Table 20 Specifications of XFP transceiver modules (1) Product code Name Central wavelen gth (nm) Data rate (Gbps) Fiber mode Fiber diameter (µm) Modal bandwidth (MHz*km) Maximum transmission distance 2000 300 m (984.25 ft) 500 82 m (269.03 ft) 400 66 m (216.54 ft) 62.5/12 5 200 33 m (108.27 ft) 160 26 m (85.
Product code Name Central wavelen gth (nm) Data rate (Gbps) Fiber mode Fiber diameter (µm) Modal bandwidth (MHz*km) Maximum transmission distance JD107A HP X130 10G XFP LC ZR 1550nm Transceiver 1550 9.95 to 10.31 SMF 9/125 N/A 80 km (49.71 miles) JG226A HP X180 10G XFP LC LH 80km 1538.98nm DWDM Transceiver 1538.98 9.95 to 10.31 SMF 9/125 N/A 80 km (49.71 miles) JG227A HP X180 10G XFP LC LH 80km 1539.77nm DWDM Transceiver 1539.77 9.95 to 10.31 SMF 9/125 N/A 80 km (49.
Connector index (dBm) Product code Name JD088A Output optical power Receiving sensitivity Saturated optical power HP X130 10G POS XFP LC LR Transceiver –6.0 to –1.0 ≤–14.4 ≤0.5 JD121A HP X135 10G XFP LC ER Transceiver –1.0 to +2 ≤–14.1 ≤–1 JD107A HP X130 10G XFP LC ZR 1550nm Transceiver –1.0 to +3 ≤–24 ≤–7 JG226A HP X180 10G XFP LC LH 80km 1538.98nm DWDM Transceiver –1.0 to +3 ≤–24 ≤–7 JG227A HP X180 10G XFP LC LH 80km 1539.77nm DWDM Transceiver –1.
CX4 cables Appearance Figure 12 CX4 cable Models and specifications Table 22 Specifications of CX4 cables Product code Name Cable length JD363B HP X230 Local Connect 50cm CX4 Cable 0.5 m (1.64 ft) JD364B HP X230 Local Connect 100cm CX4 Cable 1 m (3.28 ft) JD365A HP X230 CX4 to CX4 3m Cable 3 m (9.
QSFP+ transceiver modules 40-Gigabit QSFP+ fiber transceiver module Appearance Figure 13 40-Gigabit QSFP+ fiber transceiver module Models and specifications 40-Gigabit QSFP+ fiber transceiver modules provide a transmission rate of 40 Gbps and use MPO connectors.
40-Gigabit QSFP+ cable Appearance Figure 14 40-Gigabit QSFP+ cable Models and specifications Table 25 Specifications of 40-Gigabit QSFP+ cables Product code Name Cable length JG326A HP X240 40G QSFP+ QSFP+ 1m Direct Attach Copper Cable 1 m (3.28 ft) JG327A HP X240 40G QSFP+ QSFP+ 3m Direct Attach Copper Cable 3 m (9.84 ft) JG328A HP X240 40G QSFP+ QSFP+ 5m Direct Attach Copper Cable 5 m (16.
Figure 15 QSFP+ to SFP+ cable Models and specifications Table 26 Specifications of QSFP+ to SFP+ cables Product code Name Cable length JG329A HP X240 40G QSFP+ to 4x10G SFP+ 1m Direct Attach Copper Splitter Cable 1 m (3.28 ft) JG330A HP X240 40G QSFP+ to 4x10G SFP+ 3m Direct Attach Copper Splitter Cable 3 m (9.84 ft) JG331A HP X240 40G QSFP+ to 4x10G SFP+ 5m Direct Attach Copper Splitter Cable 5 m (16.
CFP transceiver modules Appearance Figure 16 CFP transceiver module Models and specifications CFP transceiver modules use LC connectors. Table 27 Specifications of CFP transceiver modules (1) Product code Name Central wavelength Data rate Fiber mode Fiber diameter Maximum transmission distance 40 Gbps SMF 9/125 µm 10 km (6.
Support and other resources Contacting HP For worldwide technical support information, see the HP support website: http://www.hp.
HP Education http://www.hp.com/learn Conventions This section describes the conventions used in this documentation set. Command conventions Convention Description Boldface Bold text represents commands and keywords that you enter literally as shown. Italic Italic text represents arguments that you replace with actual values. [] Square brackets enclose syntax choices (keywords or arguments) that are optional. { x | y | ...
Network topology icons Represents a generic network device, such as a router, switch, or firewall. Represents a routing-capable device, such as a router or Layer 3 switch. Represents a generic switch, such as a Layer 2 or Layer 3 switch, or a router that supports Layer 2 forwarding and other Layer 2 features. Represents an access controller, a unified wired-WLAN module, or the switching engine on a unified wired-WLAN switch. Represents an access point.
Index #CFGMOQRSTX # M 100 Mbps BIDI transceiver module, 11 Models and specifications,18 100 Mbps SFP fiber transceiver module, 9 Models and specifications,21 10-Gigabit SFP+ cable, 17 O 10-Gigabit SFP+ fiber transceiver module, 16 Overview,1 40-Gigabit QSFP+ cable, 23 40-Gigabit QSFP+ fiber transceiver module,22 Q C QSFP+ to SFP+ cable,23 QSFP+ transceiver modules,22 CFP transceiver modules,25 Contacting HP,26 R Conventions,27 Related information,26 Copper transceiver modules,6 S CX4 cab
