HP FlexFabric 11900 2500W AC Power Supply User Guide-APW100

6
Figure 3 Removing the blank panel
(1) Unfasten the captive screws on the blank panel
(2) Remove the blank panel
3. Unpack the power supply.
4. Holding the handle of the power supply with one hand and supporting the bottom
of the power supply with the other, slide the power supply along the guide rails into
the slot.
NOTE:
The blank panel is printed with a dia
g
ram of correct installation direction. You can
follow the instruction to install the power supply. As shown in Figure 4 (vertical
installation), be sure of the correct direction of the power supply.
1
2