HP FlexFabric 11900 LSU1SUPB9 Card Manual-AP100

Manual Version:

P100-20121228 BOM: 3123A0NQ

Part number: 5998-4099

LSU1SUPB9 Service Processing Engine

1 Card identifier

The mark LSU1SUPB9 is printed at the upper left corner of the front panel, and is used to identify the

card.

2 Specifications

Table 1 LSU1SUPB9 specifications

Item LSU1SUPB9

Processor MIPS64 (Quad Core), 1.2GHz

Memory 8GB DDR3 SDRAM (2 DIMM slots)

Flash memory 500MB

NVRAM 512KB

Power consumption 45 W to 50 W

Connector RJ-45

Port quantity

• One console port

• One 10/100/1000BASE-T management port

Interface transmission speed

• Console port: ≤ 115,200 bps (default: 9,600 bps)

• 10/100/1000Base-T port: 10/100/1000 Mbps (half/full duplex)

Cable and maximum transmission

distance

• Console port: Ordinary asynchronous serial port cable; maximum

transmission distance: 15 m (49 ft).

• 10/100/1000Base-T port: Category-5 twisted pair; maximum

transmission distance: 100 m (328 ft).

Applied to HP FlexFabric 11900 Switch Series

3 Obtaining documentation

For card installation, see HP FlexFabric 11900 Switch Series Installation Guide.

For software upgrade, see HP FlexFabric 11900 Switch Series Software Upgrade Guide.

To find related documents, browse to the Manuals page of the HP Business Support Center website:

http://www.hp.com/support/manuals

The information in this document is subject to change without notice.

5998-4099