HP FlexFabric 11900 Switch Series Installation Guide

The Extended BootWare is self-decompressing......Done.

****************************************************************************

* *

* BootWare, Version 1.08 *

* *

****************************************************************************

Compiled Date : Jan 7 2013

CPU Type : XLP316

CPU Clock Speed : 1200MHz

Memory Type : DDR3 SDRAM

Memory Size : 8192MB

Memory Speed : 667MHz

BootWare Size : 1536KB

Flash Size : 500MB

BASIC CPLD Version : 1.0

EXTENDED CPLD Version: 1.0

PCB Version : Ver.A

BootWare Validating...

Press Ctrl+B to access EXTENDED-BOOTWARE MENU...

normal boot app

Loading the main image files...

Loading file flash:/11900-CMW710-SYSTEM-A2102.bin.......................

............................................................................

...................................................Done.

Loading file flash:/11900-CMW710-BOOT-A2102.bin.........................

............................................................................

............................................Done.

Image file flash:/11900-CMW710-BOOT-A2102.bin is self-decompressing.....

............................................................................

...............Done.

System image is starting...

User interface aux4/0 is available.

Press ENTER to get started.

Press Enter at the prompt. When the prompt <Sysname> appears, you can configure the switch.

After powering on the switch, verify the following items:

• The cooling system is operating, and you can hear fan rotating noise and feel air being blown out.