HP FlexFabric 11900 Switch Series Installation Guide

67
Switching fabric modules
CAUTION:
The switching fabric modules provide a console port for the HP Technical Support staff to maintain the
switches. Do not use the console port if you have not been trained for that.
You can install up to four switching fabric modules in one switch chassis.
Table 23 sho
ws the switching fabric module and chassis compatibility and Table 24 shows the switching
fabric module product code and model matrix.
Table 23 Switching fabric modules and chassis compatibility
Switchin
g
fabric model Com
p
atible chassis Minimum re
q
uirements
LSU1FAB08D9 11908-V
Install one switching fabric module
in slot 10 or slot 11.
Table 24 Switching fabric product code and model matrix
Switching fabric
model
Product
code
HP description
LSU1FAB08D9 JG610A HP FlexFabric 11908 1.92Tbps Type D Fabric Module
Power supplies
The switch supports the HP FlexFabric 11900 2500W AC Power Supply (JG616A) and HP FlexFabric
11900 2400W DC Power Supply (JG617A). The HP FlexFabric 11900 2500W AC Power Supply is an
AC-input, DC-output power supply and provides a maximum DC output power of 2500 W. The HP
FlexFabric 11900 2400W DC Power Supply is a DC-input, DC-output power supply that provides a
maximum DC output power of 2400 W.
Table 25 Power supply specifications
Item 2500W AC
2400W DC
Rated input voltage range 100 VAC to 240 VAC @ 50/60 Hz –48 VDC to –60 VDC
Rated output voltage 12 VDC 12 VDC
Maximum input current 16 A 60 A
Maximum output current
• 208 A (220 VAC)
• 100 A (110 VAC)
200 A
Maximum output power
• 1200 W (110 VAC)
• 2500 W (220 VAC)
2400 W
Temperature requirements
• Operating temperature: –10°C to +50°C (14°F to 122°F)
• Storage temperature: –40°C to +85°C (–40°F to +185°F)
You can select a certain number of power supplies according to the actual power consumption
requirements of your switch. Make sure the total maximum output power of the ordered power supplies