HP FlexFabric 11908-V LSU1FAB08D9 Card Manual-AP100

Manual Version:

P100-20121228 BOM:

3123A0NR

Part number: 5998-4098

LSU1FAB08D9 Switching Fabric Module

1 Card identifier

The mark LSU1FAB08D9 is printed in the upper left corner of the front panel to identify the card.

2 Specifications

Table 1 LSU1FAB08D9 specifications

Item LSU1FAB08D9

Processor MIPS64 (Dual Core), 750 MHz

Power consumption 101 W to 135 W

Connector RJ-45

Port quantity

One console port

WARNING!

This port is intended for HP technical support engineers to perform maintenance. Do

not use this port without professional training.

Applied to HP FlexFabric 11908-V Switch

NOTE:

hen you install a switchin

fabric module, hold the ejector levers of the module with both hands, press

the spring-clips on the ejector levers, and pull the ejector levers outward, and then press the ejector levers

inward after the module is fully seated into slot. When you remove a switching fabric module, press the

spring-clips on the ejector levers and pull the ejector levers outward, and then pull out the switchin

fabric

module.

3 Obtaining documentation

For card installation, see HP FlexFabric 11900 Switch Series Installation Guide.

For software upgrade, see HP FlexFabric 11900 Switch Series Software Upgrade Guide.

To find related documents, browse to the Manuals page of the HP Business Support Center website:

http://www.hp.com/support/manuals

The information in this document is subject to change without notice.

5998-4098

PAGE 1
Manual Version: AP100-20121228 BOM: 3123A0NR Part number: 5998-4098 LSU1FAB08D9 Switching Fabric Module 1 Card identifier The mark LSU1FAB08D9 is printed in the upper left corner of the front panel to identify the card. 2 Specifications Table 1 LSU1FAB08D9 specifications Item LSU1FAB08D9 Processor MIPS64 (Dual Core), 750 MHz Power consumption 101 W to 135 W Connector RJ-45 One console port WARNING! Port quantity This port is intended for HP technical support engineers to perform maintenance.