HP FlexFabric 11900 Switch Series About the HP FlexFabric 11900 Command References Part number: 5998-5270 Software version: Release 2111 and later Document version: 6W100-20140110
Legal and notice information © Copyright 2014 Hewlett-Packard Development Company, L.P. No part of this documentation may be reproduced or transmitted in any form or by any means without prior written consent of Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice.
About the HP FlexFabric 11900 command references The HP FlexFabric 11900 command references describe the commands and command syntax options available for the HP FlexFabric 11900 Switch Series. Command reference Content Covers the commands for logging in to and setting up the switch.
Command reference Content • ARP • Gratuitous ARP • Proxy ARP • ARP snooping • IP addressing • DHCP • DNS • DDNS • Basic IP forwarding • Load sharing commands • IP performance optimization • UDP helper • IPv6 basics • DHCPv6 • Tunneling • GRE Covers the commands for configuring routes for IPv4 and IPv6 networks of different sizes.
Command reference Content • Basic MPLS • Static LSP • LDP • MPLS TE • Static CRLSP • RSVP • Tunnel policy • MPLS L3VPN • IPv6 MPLS L3VPN • MPLS L2VPN • VPLS • MCE • IPv6 MCE Covers the commands for classifying traffic with ACLs, and allocating network resources and managing congestions with QoS technologies to improve network performance and network use efficiency.
Command reference Content • Ethernet OAM • CFD • DLDP • VRRP • BFD • Track Covers the commands that help you manage and monitor your network, for example, manage system events, and test network connectivity.
