R211x-HP Flexfabric 11900 ACL and QoS Command Reference

100
slot slot-number: Specifies a card by its slot number. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The chassis-number
argument refers to the ID of the IRF member device. The slot-number argument refers to the number of the
slot where the card resides. (In IRF mode.)
Usage guidelines
If no WRED table is specified, the command displays the configuration of all WRED tables.
If no card is specified, the command displays the configuration of the WRED tables on the active MPU.
(In standalone mode.)
If no card or IRF member ID is specified, the command displays the configuration of the WRED tables on
the global active MPU. (In IRF mode.)
Examples
# Display the configuration of WRED table 1.
<Sysname> display qos wred table name 1
Table name: 1
Table type: Queue based WRED
QID gmin gmax gprob ymin ymax yprob rmin rmax rprob exponent ECN
----------------------------------------------------------------------------
0 100 1000 10 100 1000 10 100 1000 10 9 N
1 100 1000 10 100 1000 10 100 1000 10 9 N
2 100 1000 10 100 1000 10 100 1000 10 9 N
3 100 1000 10 100 1000 10 100 1000 10 9 N
4 100 1000 10 100 1000 10 100 1000 10 9 N
5 100 1000 10 100 1000 10 100 1000 10 9 N
6 100 1000 10 100 1000 10 100 1000 10 9 N
7 100 1000 10 100 1000 10 100 1000 10 9 N
Table 37 Command output
Field Descri
p
tion
QID Queue ID.
gmin Lower limit for green packets.
gmax Upper limit for green packets.
gprob Drop probability for green packets.
ymin Lower limit for yellow packets.
ymax Upper limit for yellow packets.
yprob Drop probability for yellow packets.
rmin Lower limit for red packets.
rmax Upper limit for red packets.
rprob Drop probability for red packets.
exponent Exponent for average queue length calculation.
ECN
Indicates whether ECN is enabled for the queue:
• Y—Enabled.
• N—Disabled.