R211x-HP Flexfabric 11900 ACL and QoS Command Reference

101
qos wred apply
Use qos wred apply to apply a WRED table on an interface.
Use undo qos wred apply to restore the default.
Syntax
qos wred apply [ table-name ]
undo qos wred apply
Default
No WRED table is applied to an interface, and the tail drop mode is used on an interface.
Views
Layer 2 Ethernet interface view, Layer 3 Ethernet interface view
Predefined user roles
network-admin
Parameters
table-name: Specifies a WRED table by its name.
Usage guidelines
If no WRED table is specified, the command applies the default WRED table to the interface.
Examples
# Apply the WRED table table1 to interface Ten-GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] qos wred apply table1
Related commands
• display qos wred interface
• display qos wred table
• qos wred queue table
qos wred queue table
Use qos wred queue table to create a WRED table and enter WRED table view.
Use undo qos wred queue table to delete a WRED table.
Syntax
qos wred queue table table-name
undo qos wred queue table table-name
Default
No WRED table exists on the switch.
Views
System view