R211x-HP Flexfabric 11900 ACL and QoS Command Reference

7
Usage guidelines
If you specify neither the inbound keyword nor the outbound keyword, the command displays the ACL
application information for both incoming and outgoing packet filtering.
Examples
# Display ACL application information for incoming packet filtering on interface Ten-GigabitEthernet
1/0/1.
<Sysname> display packet-filter interface ten-gigabitethernet 1/0/1 inbound
Interface: Ten-GigabitEthernet1/0/1
In-bound policy:
ACL6 2000
ACL 2001 , Hardware-count
IPv4 default action: Deny
IPv6 default action: Deny
Command output
Field Descri
p
tion
Interface Interface to which the ACL applies.
In-bound policy ACL used for filtering incoming traffic.
Out-bound policy ACL used for filtering outgoing traffic.
ACL6 2000 IPv6 basic ACL 2000 has been successfully applied.
ACL 2001 IPv4 basic ACL 2001 has been successfully applied.
Hardware-count Successfully enables counting ACL rule matches.
IPv4 default action
Packet filter default action for packets that do not match any IPv4
ACLs. This field is displayed only when the default action is deny.
IPv6 default action
Packet filter default action for packets that do not match any IPv6
ACLs. This field is displayed only when the default action is deny.
display packet-filter statistics
Use display packet-filter statistics to display match statistics of ACLs for packet filtering.
Syntax
display packet-filter statistics interface interface-type interface-number { inbound | outbound } [ [ ipv6 ]
{ acl-number | name acl-name } ] [ brief ]
Views
Any view
Predefined user roles
network-admin
network-operator