R211x-HP Flexfabric 11900 ACL and QoS Command Reference

9
Table 2 Command output
Field Descri
p
tion
Interface Interface to which the ACL applies.
In-bound policy ACL used for filtering incoming traffic.
Out-bound policy ACL used for filtering outgoing traffic.
ACL6 2000 IPv6 basic ACL 2000 has been successfully applied.
ACL 2001 IPv4 basic ACL 2001 has been successfully applied.
Hardware-count Successfully enables counting ACL rule matches.
From 2011-06-04 10:25:21 to
2011-06-04 10:35:57
Start time and end time of the statistics.
2 packets
Two packets matched the rule.
This field is not displayed when no packets matched the rule.
Totally 0 packets permitted, 0 packets
denied
Number of packets permitted and denied by the ACL.
Totally 0% permitted, 0% denied Ratios of permitted and denied packets to all packets.
IPv4 default action
Packet filter default action for packets that do not match any IPv4
ACLs. This field is displayed only when the default action is deny.
IPv6 default action
Packet filter default action for packets that do not match any IPv6
ACLs. This field is displayed only when the default action is deny.
Related commands
reset packet-filter statistics
display packet-filter statistics sum
Use display packet-filter statistics sum to display accumulated packet filtering ACL statistics.
Syntax
display packet-filter statistics sum { inbound | outbound } [ ipv6 ] { acl-number | name acl-name }
[ brief ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
inbound: Displays the statistics in the inbound direction.
outbound: Displays the statistics in the outbound direction.