R211x-HP Flexfabric 11900 ACL and QoS Command Reference

12
Examples
# Display application details of all IPv4 ACLs (including IPv4 basic, IPv4 advanced, and Ethernet frame
header ACLs) for incoming packet filtering on Ten-GigabitEthernet 1/0/1.
<Sysname> display packet-filter verbose interface ten-gigabitethernet 1/0/1 inbound
Interface: Ten-GigabitEthernet1/0/1
In-bound policy:
ACL6 2000
rule 5 permit source 1::/64
ACL 2001, Hardware-count
rule 0 permit source 2.2.2.2 0
rule 5 permit source 1.1.1.1 0
IPv4 default action: Deny
IPv6 default action: Deny
Table 4 Command output
Field Descri
p
tion
Interface Interface to which the ACL applies.
In-bound policy ACL used for filtering incoming traffic.
Out-bound policy ACL used for filtering outgoing traffic.
ACL6 2000 IPv6 basic ACL 2000 has been successfully applied.
ACL 2001 IPv4 basic ACL 2001 has been successfully applied.
Hardware-count Successfully enables counting ACL rule matches.
IPv4 default action
Packet filter default action for packets that do not match any IPv4
ACLs. This field is displayed only when the default action is
deny.
IPv6 default action
Packet filter default action for packets that do not match any IPv6
ACLs. This field is displayed only when the default action is
deny.
display qos-acl resource
Use display qos-acl resource to display QoS and ACL resource usage.
Syntax
In standalone mode:
display qos-acl resource [ slot slot-number ]
In IRF mode:
display qos-acl resource [ chassis chassis-number slot slot-number ]
Views
Any view