R211x-HP Flexfabric 11900 ACL and QoS Command Reference

13
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
slot slot-number: Specifies a card by its slot number. If no slot is specified, the command displays ACL
QoS and ACL resource usage on all cards. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The chassis-number
argument represents the ID of the IRF member device, and the slot-number argument represents the
number of the slot that holds the card. If no card is specified, the command displays QoS and ACL
resource usage on member devices of the IRF fabric. (In IRF mode.)
Usage guidelines
The command does not display any usage data if the specified card or IRF member device does not
support counting QoS and ACL resource.
Examples
# Display QoS and ACL resource usage.
<Sysname> display qos-acl resource
Interfaces: XGE9/0/1 to XGE9/0/5, XGE9/0/6
XGE9/0/7 to XGE9/0/8, XGE9/0/9
XGE9/0/10 to XGE9/0/24
---------------------------------------------------------------------
Type Total Reserved Configured Remaining Usage
---------------------------------------------------------------------
VFP ACL 1024 512 0 512 50%
IFP ACL 2048 1280 15 753 63%
IFP Meter 1024 640 0 384 62%
IFP Counter 1024 640 3 381 62%
EFP ACL 1024 0 1 1023 0%
EFP Meter 512 0 0 512 0%
EFP Counter 512 0 1 511 0%
Interfaces: XGE9/0/25 to XGE9/0/48
---------------------------------------------------------------------
Type Total Reserved Configured Remaining Usage
---------------------------------------------------------------------
VFP ACL 1024 256 0 768 25%
IFP ACL 2048 1280 0 768 62%
IFP Meter 1024 640 0 384 62%
IFP Counter 1024 640 0 384 62%
EFP ACL 1024 0 0 1024 0%
EFP Meter 512 0 0 512 0%
EFP Counter 512 0 0 512 0%