R211x-HP Flexfabric 11900 ACL and QoS Command Reference

34
QoS policy commands
Traffic class commands
display traffic classifier
Use display traffic classifier to display traffic class information.
Syntax
In standalone mode:
display traffic classifier user-defined [ classifier-name ] [ slot slot-number ]
In IRF mode:
display traffic classifier user-defined [ classifier-name ] [ chassis chassis-number slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
user-defined: Displays user-defined traffic classes.
classifier-name: Specifies a traffic class by its name, a case-sensitive string of 1 to 31 characters. If no
traffic class is specified, this command displays information about all traffic classes.
slot slot-number: Specifies a card by its slot number. If no card is specified, this command displays the
traffic classes on all cards. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The chassis-number
argument represents the IRF member ID, and the slot-number argument represents the slot number of the
card. If no card is specified, this command displays the traffic classes on all cards of all member devices.
(Distributed devices–In IRF mode.)
Examples
# Display information about all user-defined traffic classes.
<Sysname> display traffic classifier user-defined
User-defined classifier information:
Classifier: 1 (ID 100)
Operator: AND
Rule(s) :