R211x-HP Flexfabric 11900 ACL and QoS Command Reference

40
[Sysname] traffic classifier class1
[Sysname-classifier-class1] if-match protocol ip
# Define a match criterion for traffic class class1 to match the packets of customer network VLAN 1, 6, or
9.
<Sysname> system-view
[Sysname] traffic classifier class1
[Sysname-classifier-class1] if-match customer-vlan-id 1 6 9
# Define a match criterion for traffic class class1 to match the packets of service provider network VLAN
2, 7, or 10.
<Sysname> system-view
[Sysname] traffic classifier class1
[Sysname-classifier-class1] if-match service-vlan-id 2 7 10
# Define a match criterion for traffic class class1 to match the packets with a local QoS ID of 3.
<Sysname> system-view
[Sysname] traffic classifier class1
[Sysname-classifier-class1] if-match qos-local-id 3
# Define a match criterion for traffic class class1 to match ARP protocol packets.
<Sysname> system-view
[Sysname] traffic classifier class1
[Sysname-classifier-class1] if-match control-plane protocol arp
# Define a match criterion for traffic class class1 to match packets of the protocols in protocol group
normal.
<Sysname> system-view
[Sysname] traffic classifier class1
[Sysname-classifier-class1] if-match control-plane protocol-group normal
traffic classifier
Use traffic classifier to create a traffic class and enter traffic class view.
Use undo traffic classifier to delete a traffic class.
Syntax
traffic classifier classifier-name [ operator { and | or } ]
undo traffic classifier classifier-name
Default
No traffic class exists.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
classifier-name: Specifies a traffic class name, a case-sensitive string of 1 to 31 characters.