R211x-HP Flexfabric 11900 ACL and QoS Command Reference

Default

No local QoS ID marking action is configured.

Views

Traffic behavior view

Predefined user roles

network-admin

mdc-admin

Parameters

local-id-value: Specifies the local QoS ID to be marked for packets. The value range for this argument is

1 to 4095. The switch supports local QoS IDs in the range of 1 to 3999.

Usage guidelines

Remarking local QoS IDs combines different traffic classes into one new class, which is indicated by a

local QoS ID. You can configure a traffic behavior for this new class to implement two levels of actions

on a traffic class.

Remarking local QoS IDs applies to only the incoming traffic.

Examples

# Configure the action of marking packet with local QoS ID 2.

<Sysname> system-view

[Sysname] traffic behavior database

[Sysname-behavior-database] remark qos-local-id 2

remark service-vlan-id

Use remark service-vlan-id to add a SVLAN marking action to a traffic behavior.

Use undo remark service-vlan-id to remove the action from the traffic behavior.

Syntax

remark service-vlan-id vlan-id

undo remark service-vlan-id