R211x-HP Flexfabric 11900 ACL and QoS Command Reference

56
card. If no card is specified, this command displays the QoS policies on all cards of all member devices.
(In IRF mode.)
Examples
# Display the configuration information of all the user-defined QoS policies.
<Sysname> display qos policy user-defined
User-defined QoS policy information:
Policy: 1 (ID 100)
Classifier: 1 (ID 0)
Behavior: 1
Marking:
Remark dscp 3
Committed Access Rate:
CIR 112 (kbps), CBS 8192 (Bytes), EBS 512 (Bytes)
Green action: pass
Yellow action: pass
Red action: discard
Classifier: 2 (ID 101)
Behavior: 2
Accounting enable: Packet
Filter enable: Permit
Marking:
Remark dot1p 1
Classifier: 3 (ID 102)
Behavior: 3
-none-
display qos policy control-plane
Use display qos policy control-plane to display information about the QoS policies applied to a control
plane.
Syntax
In standalone mode:
display qos policy control-plane slot slot-number [ inbound ]
In IRF mode:
display qos policy control-plane chassis chassis-number slot slot-number [ inbound ]
Views
Any view
Predefined user roles
network-admin
network-operator