R211x-HP Flexfabric 11900 ACL and QoS Command Reference

Parameters

slot slot-number: Displays information about the QoS policies applied to the control plane of the card

specified by the slot number. (In standalone mode.)

inbound: Displays information about the QoS policy applied to the incoming traffic of the control plane.

chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The chassis-number

argument refers to the ID of the IRF member device, and the slot-number argument refers to the number

of the slot where the card resides. (In IRF mode.)

Examples

# (In standalone mode.) Display information about the QoS policy applied to the incoming traffic of the

control plane of the card in slot 3.

<Sysname> display qos policy control-plane slot 3 inbound

Control plane

Direction: Inbound

Policy: 1

Classifier: 1

Operator: AND

Rule(s) : If-match acl 2000

Behavior: 1

Marking:

Remark dscp 3

Committed Access Rate:

CIR 128 (kbps), CBS 8192 (Bytes), EBS 512 (Bytes)

Green action: pass

Yellow action: pass

Red action: discard

Green packets: 0(Packets)

Red packets: 0(Packets)

Classifier: 2

Operator: AND

Rule(s) : If-match protocol ipv6

Behavior: 2

Accounting enable:

0 (Packets)

Filter enable: Permit

Table 19 Command output

Field Descri

tion

Direction Direction (inbound) in which the QoS policy is applied.

Green packets Statistics about green packets.

Red packets Statistics about red packets.

For the output description, see Table 15 and Table 17.