R211x-HP Flexfabric 11900 ACL and QoS Command Reference

58
display qos policy control-plane pre-defined
Use display qos policy control-plane pre-defined to display information about the pre-defined QoS
policy applied to the control plane.
Syntax
In standalone mode:
display qos policy control-plane pre-defined [ slot slot-number ]
In IRF mode:
display qos policy control-plane pre-defined [ chassis chassis-number slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
slot slot-number: Displays information about the pre-defined QoS policy applied to the control plane of
the card specified by the slot number. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The chassis-number
argument refers to the ID of the IRF member device, and the slot-number argument refers to the number
of the slot where the card resides. (In IRF mode.)
Usage guidelines
If no card is specified, this command displays information about the pre-defined QoS policy applied to
the control plane of each in-position card. (In standalone mode.)
If no card or IRF member ID is specified, this command displays information about the pre-defined QoS
policy applied to the control plane of each in-position card on any member device of the IRF fabric. (In
IRF mode.)
Examples
# Display information about the pre-defined QoS policy applied to the control plane of the card in slot
3.
<Sysname> display qos policy control-plane pre-defined slot 3
Pre-defined control plane policy slot 3
Protocol Priority Bandwidth (kbps) Group
IS-IS 29 512 critical
VRRP 36 512 important
OSPF Multicast 30 256 critical
OSPF Unicast 30 256 critical
IGMP 18 512 important
OSFPv3 Unicast 30 256 critical
OSPFv3 Multicast 30 256 critical
VRRPv6 36 512 important
ARP 12 256 normal
DHCP Snooping 18 256 redirect