R211x-HP Flexfabric 11900 ACL and QoS Command Reference

If no slot or IRF member ID is specified, this command displays the global QoS policies applied to the

global active MPU. (In IRF mode.)

Examples

# Display information about the inbound global QoS policy.

<Sysname> display qos policy global inbound

Direction: Inbound

Policy: 1

Classifier: 1

Operator: AND

Rule(s) : If-match acl 2000

Behavior: 1

Marking:

Remark dscp 3

Committed Access Rate:

CIR 128 (kbps), CBS 8192 (Bytes), EBS 512 (Bytes)

Green action: pass

Yellow action: pass

Red action: discard

Green packets: 0(Packets)

Red packets: 0(Packets)

Classifier: 2

Operator: AND

Rule(s) : If-match protocol ipv6

Behavior: 2

Accounting enable:

0 (Packets)

Filter enable: Permit

Marking:

Remark dot1p 1

Table 21 Command output

Field Descri

tion

Direction Direction (inbound or outbound ) in which the QoS policy is applied.

Green packets Statistics about green packets.

Red packets Statistics about red packets.

For the output description, see Table 15 and Table 17.

display qos policy interface

Use display qos policy interface to display information about the QoS policies applied to an interface or

all interfaces.

Syntax

display qos policy interface [ interface-type interface-number ] [ inbound | outbound ]