R211x-HP Flexfabric 11900 ACL and QoS Command Reference

Views

Any view

Predefined user roles

network-admin

network-operator

mdc-admin

mdc-operator

Parameters

interface-type interface-number: Specifies an interface by its type and number to display information

about the QoS policies applied to it.

inbound: Displays information about the QoS policy applied to the incoming traffic of the specified

interface.

outbound: Displays information about the QoS policy applied to the outgoing traffic of the specified

interface.

Usage guidelines

If no direction is specified, the command displays information about the QoS policy applied to the

incoming traffic and the QoS policy applied to the outgoing traffic.

Examples

# Display information about the QoS policy applied to the incoming traffic of Ten-GigabitEthernet

1/0/1.

<Sysname> display qos policy interface Ten-GigabitEthernet1/0/1 inbound

Interface: Ten-GigabitEthernet1/0/1

Direction: Inbound

Policy: 1

Classifier: 1

Operator: AND

Rule(s) : If-match acl 2000

Behavior: 1

Marking:

Remark dscp 3

Committed Access Rate:

CIR 128 (kbps), CBS 8192 (Bytes), EBS 512 (Bytes)

Green action: pass

Yellow action: pass

Red action: discard

Green packets: 0(Packets)

Red packets: 0(Packets)

Classifier: 2

Operator: AND

Rule(s) : If-match protocol ipv6

Behavior: 2