R211x-HP Flexfabric 11900 ACL and QoS Command Reference

chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The chassis-number

argument refers to the ID of the IRF member device, and the slot-number argument refers to the number

of the slot where the card resides. (In IRF mode.)

Usage guidelines

If no direction is specified, this command displays information about QoS policies applied to VLANs in

both the inbound and outbound directions.

If no slot number is specified, this command displays information about all QoS policies applied to the

active MPU. (In standalone mode.)

If no slot or IRF member ID is specified, this command displays information about all QoS policies

applied to the global active MPU. (In IRF mode.)

Examples

# Display information about QoS policies applied to VLAN 2.

<Sysname> display qos vlan-policy vlan 2

Vlan 2

Direction: Outbound

Policy: 1

Classifier: 1

Operator: AND

Rule(s) : If-match acl 2000

Behavior: 1

Marking:

Remark dscp 3

Committed Access Rate:

CIR 128 (kbps), CBS 8192 (Bytes), EBS 512 (Bytes)

Green action: pass

Yellow action: pass

Red action: discard

Green packets: 0(Packets)

Red packets: 0(Packets)

Classifier: 2

Operator: AND

Rule(s) : If-match protocol ipv6

Behavior: 2

Accounting enable:

0 (Packets)

Filter enable: Permit

Marking:

Remark dot1p 1

Classifier: 3

Operator: AND

Rule(s) : -none-

Behavior: 3

-none-