R211x-HP Flexfabric 11900 ACL and QoS Command Reference

67
inbound: Applies the QoS policy to the incoming packets on all interfaces.
outbound: Applies the QoS policy to the outgoing packets on all interfaces.
Usage guidelines
An aggregate QoS policy takes effect on all incoming or outgoing traffic depending on the direction in
which the QoS policy is applied.
Examples
# Apply the QoS policy user1 to the incoming traffic globally.
<Sysname> system-view
[Sysname] qos apply policy user1 global inbound
qos policy
Use qos policy to create a QoS policy and enter QoS policy view.
Use undo qos policy to delete a QoS policy.
Syntax
qos policy policy-name
undo qos policy policy-name
Default
No QoS policy is configured.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
policy-name: QoS policy name, a case-sensitive string of 1 to 31 characters.
Usage guidelines
To use the undo qos policy command to delete a QoS policy that has been applied to a certain object,
you must first remove it from the object.
Examples
# Define QoS policy user1.
<Sysname> system-view
[Sysname] qos policy user1
[Sysname-qospolicy-user1]
Related commands
• classifier behavior
• qos apply policy
• qos apply policy global
• qos vlan-policy