R211x-HP Flexfabric 11900 ACL and QoS Command Reference

69
Predefined user roles
network-admin
Parameters
inbound: Clears the statistics of the QoS policy applied to the incoming traffic of the control plane.
slot slot-number: Clears the statistics of the QoS policies applied to the control plane of the card specified
by the slot number. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The chassis-number
argument refers to the ID of the IRF member device, and the slot-number argument refers to the number
of the slot where the card resides. (In IRF mode.)
Examples
# (In standalone mode.) Clear the statistics of the QoS policy applied to the incoming traffic of the control
plane of card 3.
<Sysname> reset qos policy control-plane slot 3 inbound
# (In IRF mode.) Clear the statistics of the QoS policy applied in each direction of the control plane of
card 3 on IRF member 1.
<Sysname> reset qos policy control-plane chassis 1 slot 3
reset qos policy global
Use reset qos policy global to clear the statistics of an aggregate QoS policy.
Syntax
reset qos policy global [ inbound | outbound ]
Views
User view
Predefined user roles
network-admin
mdc-admin
Parameters
inbound: Clears the statistics of the global QoS policy applied to incoming traffic globally.
outbound: Clears the statistics of the global QoS policy applied to outgoing traffic globally.
Usage guidelines
If no direction is specified, this command clears the statistics of the global QoS policies in both directions.
Examples
# Clear the statistics of the global QoS policy applied to the incoming traffic globally.
<Sysname> reset qos policy global inbound
reset qos vlan-policy
Use reset qos vlan-policy to clear the statistics of the QoS policy applied in a certain direction of a
VLAN.