R211x-HP Flexfabric 11900 ACL and QoS Command Reference

71
Priority mapping commands
Priority map commands
display qos map-table
Use display qos map-table to display the configuration of a priority map.
Syntax
display qos map-table [ dot1p-dp | dot1p-exp | dot1p-lp | dscp-dot1p| dscp-dp | dscp-dscp |
exp-dot1p ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
The device provides the following types of priority map.
Table 25 Priority maps
Priorit
y
ma
pp
in
g
Descri
p
tion
dot1p-dp 802.1p-drop priority map.
dot1p-exp 802.1p-EXP priority map.
dot1p-lp 802.1p-local priority map.
dscp-dot1p DSCP-802.1p priority map.
dscp-dp DSCP-drop priority map.
dscp-dscp DSCP-DSCP priority map.
exp-dot1p EXP-802.1p priority map.
Usage guidelines
If no priority map is specified, this command displays the configuration information of all priority maps.
If no parameter is specified, this command displays all priority maps.
Examples
# Display the configuration of the 802.1p-local priority map.
<Sysname> display qos map-table dot1p-lp
MAP-TABLE NAME: dot1p-lp TYPE: pre-define