R211x-HP Flexfabric 11900 ACL and QoS Command Reference

74
Views
Layer 2 Ethernet interface view, Layer 3 Ethernet interface view
Predefined user roles
network-admin
mdc-admin
Parameters
priority-value: Specifies the port priority value. The port priority ranges from 0 to 7.
Examples
# Set the port priority of interface Ten-GigabitEthernet 1/0/1 to 2.
<Sysname> system-view
[Sysname] interface Ten-GigabitEthernet 1/0/1
[Sysname-Ten-GigabitEthernet 1/0/1] qos priority 2
Related commands
display qos trust interface
Priority trust mode commands
display qos trust interface
Use display qos trust interface to display priority trust mode and port priority information on an interface.
Syntax
display qos trust interface [ interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
interface-type interface-number: Specifies an interface by its type and number. If no interface is specified,
this command displays priority trust mode and port priority information of all interfaces.
Examples
# Display the priority trust mode and port priority information of Ten-GigabitEthernet 1/0/1.
<Sysname> display qos trust interface Ten-GigabitEthernet 1/0/1
Interface: Ten-GigabitEthernet1/0/1
Port priority information
Port priority: 0
Port priority trust type: none