R211x-HP Flexfabric 11900 ACL and QoS Command Reference

GTS and rate limit commands

GTS commands

display qos gts interface

Use display qos gts interface to view generic traffic shaping (GTS) configuration and statistics on a

specified interface or all the interfaces.

Syntax

display qos gts interface [ interface-type interface-number ]

Views

Any view

Predefined user roles

network-admin

network-operator

mdc-admin

mdc-operator

Parameters

interface-type interface-number: Specifies an interface by its type and number. If no interface is specified,

this command displays the GTS configuration and statistics on all the interfaces.

Examples

# Display the GTS configuration and statistics on all the interfaces.

<Sysname> display qos gts interface

Interface : Ten-GigabitEthernet1/0/1

Rule(s): If-match queue 1

CIR 128 (kbps), CBS 8192 (Bytes)

Rule(s): If-match queue 2

CIR 256 (kbps), CBS 16384 (Bytes)

Table 28 Command output

Field Descri

tion

Interface Interface type and interface number.

Rule Match criteria.

CIR CIR in kbps.

CBS CBS in bytes, which specifies the depth of the token bucket for holding bursty traffic.