R211x-HP Flexfabric 11900 ACL and QoS Command Reference

77
qos gts
Use qos gts to set GTS parameters for the packets in a specific queue.
Use undo qos gts to remove GTS parameters for traffic of a specific queue on the interface.
Syntax
qos gts queue queue-number cir committed-information-rate [ cbs committed-burst-size ]
undo qos gts queue queue-number
Default
No GTS parameters are configured on an interface.
Views
Layer 2 Ethernet interface view, Layer 3 Ethernet interface view
Predefined user roles
network-admin
mdc-admin
Parameters
queue queue-number: Shapes the packets in the specified queue. The value range for the queue-number
argument is 0 to 7.
cir committed-information-rate: Specifies the CIR in kbps. The value range for the
committed-information-rate argument is 8 to 1000000 for GE interfaces, 8 to 10000000 for 10-GE
interfaces, and 8 to 40000000 for 40-GE interfaces. The values must be integral multiples of 8.
cbs committed-burst-size: Specifies the CBS in bytes. The value range for the committed-burst-size
argument is an integral multiple of 512 between 512 and 16000000. The default value for this argument
is the product of 62.5 and the CIR and must be an integral multiple of 512. If the product is not an integral
multiple of 512, it is rounded up to the nearest integral multiple of 512 that is greater than the product.
Examples
# Shape the packets in queue 1 on Ten-GigabitEthernet 1/0/1. The GTS parameters are as follows: CIR
is 6400 kbps and CBS is 51200 bytes.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] qos gts queue 1 cir 6400 cbs 51200
Rate limit commands
display qos lr interface
Use display qos lr interface to view the rate limit configuration and statistics on a specified interface or
all the interfaces.
Syntax
display qos lr interface [ interface-type interface-number ]