R211x-HP Flexfabric 11900 ACL and QoS Command Reference

Predefined user roles

network-admin

mdc-admin

Parameters

inbound: Limits the rate of incoming packets on the interface.

outbound: Limits the rate of outgoing packets on the interface.

cir committed-information-rate: Specifies the CIR in kbps. The value range for the

committed-information-rate argument is 8 to 1000000 for GE interfaces, 8 to 10000000 for 10-GE

interfaces, and 8 to 40000000 for 40-GE interfaces. The values must be integral multiples of 8.

cbs committed-burst-size: Specifies the CBS in bytes. The value range for the committed-burst-size

argument is an integral multiple of 512 between 512 and 128000000. The default value for this

argument is the product of 62.5 and the CIR and must be an integral multiple of 512. If the product is not

an integral multiple of 512, it is rounded up to the nearest integral multiple of 512 that is greater than the

product.

Examples

# Limit the rate of outgoing packets on Ten-GigabitEthernet 1/0/1, with CIR 25600 kbps and CBS

512000 bytes.

<Sysname> system-view

[Sysname] interface ten-gigabitethernet 1/0/1

[Sysname-Ten-GigabitEthernet1/0/1] qos lr outbound cir 25600 cbs 512000