R211x-HP Flexfabric 11900 ACL and QoS Command Reference

81
Syntax
qos sp
undo qos sp
Default
An interface uses the SP queuing algorithm.
Views
Layer 2 Ethernet interface view, Layer 3 Ethernet interface view
Predefined user roles
network-admin
mdc-admin
Examples
# Enable SP queuing on Ten-GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] qos sp
Related commands
display qos queue sp interface
WRR commands
display qos queue wrr interface
Use display qos queue wrr interface to display the WRR queuing configuration on an interface.
Syntax
display qos queue wrr interface [ interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
interface-type interface-number: Specifies an interface by its type and number. If no interface is specified,
this command displays the WRR queuing configuration of all the interfaces.
Examples
# Display the WRR queuing configuration of Ten-GigabitEthernet 1/0/1.
<Sysname> display qos wrr queue interface ten-gigabitethernet 1/0/1