R211x-HP Flexfabric 11900 ACL and QoS Command Reference

84
schedule-value: Specifies a scheduling weight for the specified queue in WRR queuing, in the range of
1 to 15.
Usage guidelines
You must use the qos wrr command to enable WRR queuing before you can configure WRR queuing
parameters for a queue on an interface.
The queue-id argument can be either a number or a keyword. Table 32 sh
ows the number-keyword map.
Table 32 The number-keyword map for the
queue-id argument
Number Ke
y
word
0 be
1 af1
2 af2
3 af3
4 af4
5 ef
6 cs6
7 cs7
Examples
# Enable byte-count WRR queuing on Ten-GigabitEthernet 1/0/1, and assign queue 0 with a scheduling
weight of 10 to WRR group 1.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] qos wrr byte-count
[Sysname-Ten-GigabitEthernet1/0/1] qos wrr 0 group 1 byte-count 10
Related commands
• display qos queue wrr interface
• qos wrr
qos wrr group sp
Use qos wrr group sp to assign a queue to the SP group.
Use undo qos wrr group sp to restore the default.
Syntax
qos wrr queue-id group sp
undo qos wrr queue-id
Default
An interface uses the byte-count WRR queuing algorithm, and all the queues are in WRR group 1.
Views
Layer 2 Ethernet interface view, Layer 3 Ethernet interface view