R211x-HP Flexfabric 11900 EVB Command Reference

12
Link: ADM - administratively down; Stby - standby
Speed or Duplex: (a)/A - auto; H - half; F - full
Type: A - access; T - trunk; H - hybrid
Interface Link Speed Duplex Type PVID Description
SCH1/0/1:10.1 UP -- -- -- --
# Display brief information about all S-channel interfaces and VSIs in DOWN state.
<Sysname> display interface s-channel brief down
Brief information on interface(s) under bridge mode:
Link: ADM - administratively down; Stby - standby
Interface Link Cause
SCH1/0/1:11 DOWN Not connected
SCH1/0/1:11.1 DOWN Not connected
Table 6 Command output
Field Descri
p
tion
Current state
Interface status:
• Administratively DOWN—The interface is administratively down.
• DOWN—The interface is administratively up but physically down.
• UP—The interface is both administratively and physically up.
Hardware Address Hardware address of the interface.
Description Description information for the interface.
Bandwidth Expected bandwidth for an S-channel interface or a VSI.
PVID Default VLAN ID of the interface.
Port link-type Link type of the interface.
Trunk port encapsulation Encapsulation type of the trunk port.
Last clearing of counters
Last time the reset counters interface command was executed to clear
interface statistics.
Never indicates interface statistics have never been cleared since
startup.
Input (total): 6 packets, 384 bytes
Total number of packets and bytes that the S-channel interface
received.
Output (total): 18 packets, 1152 bytes Total number of packets and bytes that the S-channel interface sent.
Link
Physical connection status of an interface:
• UP—The link is physically up.
• DOWN—The link is physically down.
• ADM—The link is administratively down.
• Stby—A standby interface.
Duplex
Duplex mode of an interface:
• (a)/A—Autonegotiation.
• H—Half-duplex.
• F—Full-duplex.