R211x-HP Flexfabric 11900 EVB Command Reference

• When a filter configured on a VSI aggregate interface contains information about a VLAN, you

must not configure the filter on the same VSI aggregate interface again or on other VSI aggregate

interfaces of the S-channel aggregate interface. If you do, an error message appears.

• Activate a VSI aggregate interface after configuring a VSI filter, and deactivate a VSI aggregate

interface before removing a VSI filter.

Examples

# Configure a VSI filter for VLAN 1 on VSI S-Channel 1/0/1:10.1.

<Sysname> system-view

[Sysname] interface s-channel 1/0/1:10.1

[Sysname–S-Channel1/0/1:10.1] evb vsi filter vlan 1

# Configure a VSI filter for VLAN 1 on VSI aggregate interface Schannel-Aggregation 1:10.1.

<Sysname> system-view

[Sysname] interface schannel-aggregation 1:10.1

[Sysname–Schannel-Aggregation1:10.1] evb vsi filter vlan 1

Related commands

• evb mac-learning forbidden

• evb vsi active

interface

Use interface to enter S-channel interface view, S-channel aggregate interface view, VSI view, or VSI

aggregate interface view.

Syntax

interface { s-channel | schannel-aggregation } { interface-number:channel-id |

interface-number:channel-id.vsi-local-id }

Views

System view

Predefined user roles

network-admin

mdc-admin

Parameters

s-channel: Specifies an S-channel interface or a VSI.

schannel-aggregation: Specifies an S-channel aggregate interface or a VSI aggregate interface.

interface-number:channel-id: Specifies an S-channel interface or S-channel aggregate interface by its ID.

The interface-number argument specifies the interface where the S-channel resides. The channel-id

argument specifies the ID of the S-channel.

interface-number:channel-id.vsi-local-id: Specifies a VSI or VSI aggregate interface by its ID. The

interface-number argument specifies the interface where the S-channel resides. The channel-id argument

specifies the ID of the S-channel. The vsi-local-id argument specifies the local ID of the VSI.

Examples

# Enter the view of S-channel interface S-Channel 1/0/1:10.

<Sysname> system-view