R211x-HP Flexfabric 11900 EVB Command Reference

2
Predefined user roles
network-admin
mdc-admin
Usage guidelines
CAUTION:
The default command might interrupt ongoing network services. Make sure you are fully aware of the
impacts of this command when you execute it on a live network.
This command might fail to restore the default settings for some commands for reasons such as command
dependencies and system restrictions. Use the display this command in interface view to identify these
commands. Then use their undo forms or follow the command reference to individually restore their
default settings. If your restoration attempt still fails, follow the error message instructions to resolve the
problem.
Examples
# Restore the default settings for S-channel interface S-Channel 1/0/1:10.
<Sysname> system-view
[Sysname] interface s-channel 1/0/1:10
[Sysname–S-Channel1/0/1:10] default
# Restore the default settings for VSI S-Channel 1/0/1:10.1.
<Sysname> system-view
[Sysname] interface s-channel 1/0/1:10.1
[Sysname–S-Channel1/0/1:10.1] default
description
Use description to configure a description for an interface.
Use undo description to restore the default.
Syntax
description text
undo description
Default
The default description for an interface is "interface name Interface." The following table shows
examples of interfaces and their default descriptions:
Interface Descri
p
tion
S-channel interface S-Channel 1/0/1:10 S-Channel 1/0/1:10 Interface
S-channel aggregate interface
Schannel-Aggregation 1:10
Schannel-Aggregation 1:10 Interface
VSI S-Channel 1/0/1:10.1 S-Channel 1/0/1:10.1 Interface
VSI aggregate interface
Schannel-Aggregation 1:10.1
Schannel-Aggregation 1:10.1 Interface