R211x-HP Flexfabric 11900 EVB Command Reference

Parameters

interface interface-type interface-number: Specifies an interface (Layer 2 Ethernet interface or Layer 2

aggregate interface) by its type and number. If you do not specify an interface, the command displays

CDCP negotiation information for all interfaces with EVB enabled.

Examples

# Display CDCP negotiation information for all interfaces with EVB enabled.

<Sysname> display evb cdcp

---------------------------Bridge-Aggregation1---------------------

S-component capability : Local-supported/Remote-not supported

Supported S-Channel numbers per-port : Local-167/Remote-0

SVID range : 2-4094

SCID requested from remote :

SCID/SVID pair list allocated :

<1, 1>

---------------------------Ten-GigabitEthernet1/0/1---------------------

S-component capability : Local-supported/Remote-supported

Supported S-Channel numbers per-port : Local-167/Remote-167

SVID range : 2-4094

SCID requested from remote :

1, 2, 3, 4, 6, 10, 11, 12, 34, 35, 67

SCID/SVID pair list allocated :

<1, 1>, <2, 3>, <3, 2>, <4, 5>, <6, 4>,

<10, 9>, <11, 6>, <12, 7>, <34, 23>, <35, 35>,

<67, 67>

Table 1 Command output

Field Descri

tion

S-component capability

Port-mapping S-VLAN component capability on the EVB bridge

and the EVB station.

Supported S-channel numbers per-port

Number of S-channels supported by the EVB bridge and the EVB

station.

SVID range SVID range on the EVB bridge.

SCID requested from remote SCIDs requested by the EVB station in ascending order.

SCID/SVID pair list allocated List of (SCID, SVID) pairs allocated by the EVB bridge.

display evb evb-tlv

Use display evb evb-tlv to display S-channel EVB TLV negotiation information.

Syntax

display evb evb-tlv [ interface interface-type { interface-number | interface-number:channel-id } ]

Views

Any view