R211x-HP Flexfabric 11900 EVB Command Reference

Predefined user roles

network-admin

network-operator

mdc-admin

mdc-operator

Parameters

interface: Specifies an interface. If you do not specify an interface, the command displays EVB TLV

negotiation information for all interfaces with EVB enabled.

interface-type { interface-number | interface-number:channel-id }: Specifies a Layer 2 Ethernet interface,

a Layer 2 aggregate interface, an S-channel interface, or an S-channel aggregate interface by its type

and number. The interface-number argument specifies a Layer 2 Ethernet interface or Layer 2 aggregate

interface. The interface-number:channel-id argument specifies an S-channel interface or S-channel

aggregate interface.

Examples

# Display EVB TLV negotiation information for Ten-GigabitEthernet 1/0/1.

<Sysname> display evb evb-tlv interface ten-gigabitethernet 1/0/1

S-Channel1/0/1:1

EVB mode : Local-bridge/Remote-station

BGID status : Supported

Local RR capability : Supported

Local RR status : Disabled

Remote SGID status : Not supported

Remote RR request status : Not requested

Remote RR status : Unknown

Max ECP retry time : Local-3/Remote-NA/Operative-3

ULPPDU retransmission exponent : Local-16/Remote-NA/Operative-16

Resource wait-delay exponent : Local-20/Remote-NA/Operative-20

Reinit Keep-alive exponent : Local-25/Remote-NA/Operative-25

S-Channel1/0/1:100