R211x-HP Flexfabric 11900 FCoE Command Reference

# Add zone z1 to zone set zs1.

[Sysname-vsan1-zoneset-zs1] member z1

[Sysname-vsan1-zoneset-zs1] quit

# Activate zone set zs1.

[Sysname-vsan1] zoneset activate name zs1

Related commands

• display zoneset active

• zoneset distribute full

zoneset clone

Use zoneset clone to create a zone set by copying an existing zone set.

Syntax

zoneset clone src-name dest-name

Views

VSAN view

Predefined user roles

network-admin

mdc-admin

Parameters

src-name: Specifies the name of the source zone set to be copied, a case-sensitive string of 1 to 64

characters. A source zone set name can contain English letters (uppercase and lowercase), numbers,

and special characters dollar sign ($), minus sign (-), caret (^), and underscore (_), and it must start with

an English letter.

dest-name: Specifies the name of the destination zone set, a case-sensitive string of 1 to 64 characters.

A destination zone set name can contain English letters (uppercase and lowercase), numbers, and

special characters dollar sign ($), minus sign (-), caret (^), and underscore (_), and it must start with an

English letter.

Examples

# Create zone set zs1.

<Sysname> system-view

[Sysname] vsan 1

[Sysname-vsan1] zoneset name zs1

[Sysname-vsan1-zoneset-zs1] quit

# Create zone set zs1 by copying zone set zs2.

[Sysname-vsan1] zoneset clone zs1 zs2

Related commands

• display zoneset

• zoneset name